Standard Hole Spacing to fit popular holsters.
- 3.41″ OAL
- Width: .624″
- .205″ bottom hole and horizontal slot spaced at .600″
- Horizontal slot allows clip to be mounted on an angle 8° either direction.
- Provides the same ride height as our standard 1.5″ and 1.75″ Mod 4’s.
- Designed to be worn on a pocket or behind the belt and out of sight. Nothing to be seen extending below or over the belt.
- Standard DMG/Cu finish: Color – DCC dark matte grey. Non reflective and resists corrosion very well.
- Hardware not included.
This model is available with a black split ring that can be chosen in the options menu. The split ring allows you to easily attach the clip to provide retention on things like your keys or a pocket knife while keeping them out of the bottom of your pocket.
Care and maintenance: Our new finish does not need much attention. If any light scratches or wear marks develop, we recommend a quick buff with WD40, but anything from vegetable oil to mineral oil to CLP to motor oil will work well. Just put a couple drops on your clip and rub it in vigorously using firm pressure with a lint free cloth. This will help keep it looking it’s best.